Step 1
Step4
1956 Ford Car Grille Assembly Instructions
INSTALLING "T BOLT" FASTENERS
INTO GRILLE CENTER MOLDING
1. Bend both
tension tabs
on all four
T bolts
approximately
20 degrees.
2. Place T Bolt into
back side of grille
center molding while
aligning the tension
tabs in the center
channel.
3. Depress the T Bolt
into the molding and
rotate the T bar of the T
Bolt and lock under the
rolled edges of the
molding.
Grille
center
molding
with four
T Bolts
ins;talled
Step 2 BOLT GRILLE HALVES TOGETHER
\
\
1. Bolt the LH and RH grille
halves together using two
1 /4-20 machine screws and
keps nuts.
It may be necessary to insert
body shims between the
grille halves to make grille
width adjustments when
installing the grille into the
car. This procedure may vary
from vehicle to vehicle.
Step 3 BOLT GRILLE CENTER MOLDING TO GRILLE
1. Position grille center molding in front center of grille and pass
the T Bolts through the grille.
2. Install rectangular flat washer and nut on top T Bolt.
3. Install flat washers and nuts on remaining T Bolts and fasten
all bolts. .. - .. . - • . • .. -
I '
BOLT LOWER GRILLE
BRACKETS TO GRILLE
Bolt

To top